New
MMX Performance BMW E Series Wheel Spacers
139.99€
GET IN TOUCH
At VOGUE AUTOMOTIVE, we’re committed to making sure you’re happy with our products and services—contact us anytime for help.
In Stock - Available from Supplier
Dispatch between 4 October - 11 October.
You know that tucked-in look some E-series cars have? Fix it the clean way. MMX Performance BMW E Series Wheel Spacers push the wheels out by 12 mm, 15 mm, or 18 mm, giving your BMW a wider stance, sharper turn-in, and a more planted feel. The result is simple: better presence, better confidence.
Each spacer is hubcentric, so the wheel centers on the hub the way BMW intended. That tight lip locks everything in place and helps prevent vibration from runout. They’re CNC-machined from lightweight aluminium and finished to resist corrosion, so they stay true and look tidy behind the spokes.
Pick the size that suits your setup—flush with the arch or a subtle push for daily use. Spacers this precise do more than change the view; they help the tyre work across the full width and can calm that “nervous” front end you feel on quick lane changes.
MMX Hubcentric Wheel Spacers & Bolt Kits are one of the smartest, most affordable upgrades for your BMW. A wider track sharpens stability and fills the arches for a tougher, factory-plus look.
By moving each wheel out, the spacers set the offset you want—flush with the arch—and can add the clearance you need for big brake calipers or coilovers.
Sold in pairs in 12 mm, 15 mm, or 18 mm, each set includes ten Grade 10.9 black wheel bolts. Use the longer bolts supplied—mix sizes front and rear to nail your stance.
Every spacer is hubcentric with a precision alloy spigot and the OEM 72.6 mm centre bore. That tight hub fit keeps the wheel perfectly centred and helps prevent vibration.
Built the way they should be: CNC-machined from heat-treated 7075-T6 aluminium for high strength and low weight, then black-anodised to resist corrosion. Rear face cut-outs make removal easy after hard miles, and the subtle laser-etched MMX logos finish the look.
Fitment: 72.6 mm bore, 5×120 PCD — ideal for BMW E-series models.
SPECIFICATIONS
- Spacer widths: 12mm, 15mm or 18mm (please select when ordering)
- Material: Aluminium 7075 T6
- PCD: 5×120
- Centre Bore: 72.6mm
- 10 black bolts included: M12 x 1.5
CLEANING NOTE
- As with all anodised finishes, do not clean these spacers with aggressive acidic or alkaline cleaners otherwise the appearance of the finish will be damaged.
- Use only pH balanced cleaners (ie, non-acid, non-alkaline, non-solvents). Never use ANY type of wheel cleaner or any chemicals including abrasive compounds on the spacer. We recommend washing with water and mild soap. We advise against using commercial carwashes who use aggressive chemicals such as TFR.
APPLICATIONS
Suitable for BMW E-Series:
Key models:
- 2004-2013 BMW 1 Series E81, E82, E87, E88
- 1982-1990 BMW 3 Series E30
- 1991-1996 BMW 3 Series E36
- 1997-2004 BMW 3 Series E46
- 2005-2013 BMW 3 Series E90, E91, E92, E93
- 1989-1994 BMW 5 Series E34
- 2004-2010 BMW 5 Series E60, E61
- 2003-2010 BMW 6 Series E63, E64
- 1987-2009 BMW 7 Series E32, E38, E65
- 1990-1999 BMW 8 Series E31
- 2009-2014 BMW X1 E84 X3 E83 X5 E53
- 1996-2002 BMW Z3 E36
- 2003-2009 BMW Z4 E85, E86, E89
- 2000-2003 BMW Z8 E52
NOTES
FITMENT EXCLUSIONS: WILL NOT FIT E39 E70 E71 X5 X6
FITTING INFO
Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under full right and left wheel lock.
PREPREG is a common term for a reinforcing fabric such carbon which has been pre-impregnated with a resin system. This resin system (typically epoxy) already includes the proper curing agent. As a result, the prepreg is ready to be laid into the mold without the addition of any more resin. In order for the laminate to cure, an autoclave production process is used, a combination of high pressure and heat.
- Maximum strength and performance characterictics. In a hand layup production process, it is difficult to achieve 50% fabric and 50% resin content. Typical hand laminates, even when vacuum bagged, end up with a significant amount of excess resin. Excess resin increases brittleness and reduces overall strength properties. On the other hand, most prepregs contain around 35% resin. This is ideal for maximum cured properties and generally impossible to achieve in normal hand lamination.
- Uniformity and repeatability. The prepreg is of uniform thickness and each part coming out of the mold may theoretically be the same. Vacuum bagging technology may have some errors in processing, but prepreg ensures production consistency.
- Reduce curing time. After the thermal curing cycle, no need to wait for the standard 48 hours can be fully cured.
- Aesthetics. Although prepreg processing still requires mold preparation and demoulding, prepreg processing eliminates air bubbles, makes it easier to obtain a smooth, glossy surface as well as eliminates any seaming lines.
Total reviews
Persons recommended this product
+
photo_library
Anonymous
Shopper
check_circle Verified
reply
![store icon]()
Shop owner replied
share
Anonymous
Shopper
check_circle Verified
reply
Shop owner replied
close
There are no reviews yet.
Be the first to review “ ”
Thanks for your review!
Your feedback helps us improve our service.
Please log in to submit a review.
We offer free tracked shipping on all orders within mainland EU. Orders to remote areas such as Malta, Cyprus, and Iceland may incur a surcharge. Worldwide shipping is also available—please contact us for a quote.
Most orders dispatch within one business day (Monday to Friday). EU delivery takes 3–5 working days from dispatch, and tracking details will be provided via email once your order has shipped.
Please note that import taxes may apply outside the EU, and these are the responsibility of the buyer. Some items may ship directly from our suppliers and may have varying delivery times. If an item is out of stock, we will contact you to discuss the available options.
RETURNS
Changed your mind? You can return unused, uninstalled items in original packaging within 30 days of delivery. Return shipping is the customer’s responsibility unless the item is faulty.
Custom, used, or built-to-order items are non-returnable.
Once we receive and inspect your return, refunds are typically processed within 10 business days.
If your item is damaged or incorrect, contact us within 48 hours with photos and order details.
WARRANTY
All VA and VA Motorsports products come with a 1-year limited warranty covering manufacturing defects and fitment issues. For third-party items, warranty terms vary by brand—please check the product listing or contact us for details.
This warranty does not cover wear and tear, incorrect installation, cosmetic damage, labor, or third-party costs.
To start a claim, email us with your order number, issue description, and photos. If the claim is approved, we’ll offer a replacement, store credit, or a refund.
Related products
