MMR Performance LOWERING SPRINGS BMW F31 Touring 330i 335i 340i 325D 330D

339.99

NEED HELP? CONTACT US
In Stock - Available from Supplier Dispatch between 10 October - 17 October.

The MMR Performance Lowering Springs for the BMW F31 Touring 330i, 335i, 340i, 325d, and 330d are built to sharpen handling, refine stance, and bring out the best in the F31 chassis—all without spoiling comfort on daily drives. Available for both rear-wheel drive (RWD) and xDrive all-wheel drive models, each spring set is tuned specifically to the drivetrain for a perfect fit and balanced ride.

With a carefully engineered drop of around 20mm at the front and 30mm at the rear, the springs lower the Touring’s center of gravity, cutting body roll and giving a cleaner, more precise turn-in. Push into a corner and the car feels more planted; flow through bends and it stays flatter, more composed, and more engaging to drive.

The progressive spring rates are designed to keep comfort intact during everyday use. At low speeds or on rough roads, the springs stay compliant and smooth. When you up the pace, they firm up to provide the stability and control that let you enjoy the Touring’s chassis to its fullest.

Visually, the transformation is just as satisfying. The springs remove the awkward wheel arch gap and give the car a lower, sportier stance, with a balanced look from front to rear. It’s a subtle but noticeable change that makes the Touring appear more purposeful without sacrificing practicality.

Finished in a hard-wearing MMR Metallic Grey coating, the springs are built to last and calibrated to work seamlessly with both fixed and adaptive dampers. Unlike harsh or mismatched lowering kits, these springs maintain proper suspension travel and avoid the bouncy, unsettled ride that often comes with cheap alternatives.

For BMW F31 Touring drivers—RWD or xDrive—the MMR Performance Lowering Springs deliver the ideal mix of sharper dynamics, improved aesthetics, and dependable comfort. It’s an upgrade that makes every drive more rewarding while giving your Touring the stance it always deserved.

KEY FEATURES

  • Bespoke spring poundage for improved driving dynamics
  • RWD: Approximately 30mm at the front and up to 25mm at the rear
  • xDrive: Approximately 30mm at the front and up to 20mm at the rear
  • Powder coated in MMR Metallic Grey for a durable finish

ADDITIONAL INFORMATION:

Brand

Lowering Depth

RWD: Approximately 30mm at the front and up to 25mm at the rear

xDrive: Approximately 30mm at the front and up to 20mm at the rear

PREPREG is a common term for a reinforcing fabric such carbon which has been pre-impregnated with a resin system. This resin system (typically epoxy) already includes the proper curing agent. As a result, the prepreg is ready to be laid into the mold without the addition of any more resin. In order for the laminate to cure, an autoclave production process is used, a combination of high pressure and heat.

  • Maximum strength and performance characterictics. In a hand layup production process, it is difficult to achieve 50% fabric and 50% resin content.  Typical hand laminates, even when vacuum bagged, end up with a significant amount of excess resin. Excess resin increases brittleness and reduces overall strength properties. On the other hand, most prepregs contain around 35% resin. This is ideal for maximum cured properties and generally impossible to achieve in normal hand lamination.
  • Uniformity and repeatability. The prepreg is of uniform thickness and each part coming out of the mold may theoretically be the same. Vacuum bagging technology may have some errors in processing, but prepreg ensures production consistency.
  • Reduce curing time. After the thermal curing cycle, no need to wait for the standard 48 hours can be fully cured.
  • Aesthetics. Although prepreg processing still requires mold preparation and demoulding, prepreg processing eliminates air bubbles, makes it easier to obtain a smooth, glossy surface as well as eliminates any seaming lines.

Thanks for your review!

Your feedback helps us improve our service.

Please log in to submit a review.

We offer free tracked shipping on all orders within mainland EU. Orders to remote areas such as Malta, Cyprus, and Iceland may incur a surcharge. Worldwide shipping is also available—please contact us for a quote.

Most orders dispatch within one business day (Monday to Friday). EU delivery takes 3–5 working days from dispatch, and tracking details will be provided via email once your order has shipped.

Please note that import taxes may apply outside the EU, and these are the responsibility of the buyer. Some items may ship directly from our suppliers and may have varying delivery times. If an item is out of stock, we will contact you to discuss the available options.

📦 View full shipping policy

RETURNS

Changed your mind? You can return unused, uninstalled items in original packaging within 30 days of delivery. Return shipping is the customer’s responsibility unless the item is faulty.

Custom, used, or built-to-order items are non-returnable.

Once we receive and inspect your return, refunds are typically processed within 10 business days.

If your item is damaged or incorrect, contact us within 48 hours with photos and order details.

📄 View full refund policy

WARRANTY

All VA and VA Motorsports products come with a 1-year limited warranty covering manufacturing defects and fitment issues. For third-party items, warranty terms vary by brand—please check the product listing or contact us for details.

This warranty does not cover wear and tear, incorrect installation, cosmetic damage, labor, or third-party costs.

To start a claim, email us with your order number, issue description, and photos. If the claim is approved, we’ll offer a replacement, store credit, or a refund.

📄 View full warranty policy

MMR Performance LOWERING SPRINGS BMW F31 Touring 330i 335i 340i 325D 330D
MMR Performance LOWERING SPRINGS BMW F31 Touring 330i 335i 340i 325D 330D
339.99