MMR Performance BMW S58 Power Control Module G87 M2
999.99€
In Stock - Available from Supplier
Dispatch between 24 September - 8 October.
The MMR Performance BMW S58 Power Control Module is the perfect upgrade for BMW G87 M2 owners seeking to unlock the true potential of their vehicle’s engine. Engineered with precision and built to deliver significant power and torque gains, this plug-and-play module transforms the performance of your G87 M2 while maintaining the smoothness, reliability, and drivability expected from BMW’s high-performance engineering.
The MMR Performance S58 Power Control Module optimizes critical engine parameters, including boost pressure, fuelling, and ignition timing. This dynamic tuning enhances throttle response, midrange torque, and peak power output, delivering an exhilarating driving experience whether you’re tackling backroads, cruising the highway, or dominating on the track. With this module, your S58 engine reaches new levels of performance without compromising everyday drivability or engine safety.
Designed for simplicity and ease of use, the MMR Performance S58 Power Control Module features a true plug-and-play installation process. There is no need for permanent ECU modifications, cutting, or splicing wires. The module installs in minutes and can just as easily be removed, allowing you to revert your G87 M2 to its stock configuration whenever necessary. This makes it a flexible and warranty-friendly solution for drivers who want enhanced performance without making irreversible changes.
Seamlessly integrating with the advanced engine management system of the S58 engine, the module ensures smooth and consistent power delivery across the entire rev range. Its intelligent software dynamically adjusts performance settings based on driving conditions, maximizing output while maintaining factory-set safety tolerances. This ensures that your engine remains protected, even under the increased demands of spirited driving or high-performance use.
Built to MMR Performance’s exacting standards, the MMR Performance Power Control Module is crafted to deliver exceptional results with every drive. By operating within the safe parameters of the S58 engine, the module ensures that all critical components remain reliable over the long term while still providing the thrilling performance boost BMW enthusiasts expect.
For G87 M2 owners looking to take their driving experience to the next level, the MMR Performance S58 Power Control Module offers a perfect balance of power, precision, and reliability. With sharper throttle response, stronger midrange power, and increased overall performance, this module is a must-have upgrade for enthusiasts who demand the best from their BMW.
Upgrade your G87 M2 with the MMR Performance Power Control Module S58 and experience the ultimate in plug-and-play performance. Unlock the hidden potential of your BMW, enjoy exhilarating power gains, and redefine what your M2 is capable of on the road or track.
UNLOCK UNPARALLELED POWER, EFFORTLESSLY
Maybe your G-Series M-Car can’t yet be tuned via conventional methods or you’re concerned about the warranty. Well, whatever the reason, not everyone is ready to tune their car through traditional methods; the MMR PCM could be your perfect tuning solution!
WHAT PCM DOES
PCM works by using our in-house developed calibration running on our standalone PCB, which communicates in parallel with the factory ECU. This communication route allows the PCM to safely optimise a variety of electronic sensor signals in real time, interfacing between the engine controls and its sensors.
With multiple channels such as charge air pressure, ignition and fuelling controlled by the PCM computer, the result is increased power and torque across the whole powerband of the engine.
We have carried tens of thousands of development miles of rigorous testing on our in-house dyno, on road and on track with numerous calibrations, across multiple cars and different hardware installations, allowing us to find the sweet spot for engine performance, drivability and safety.
EVERYTHING YOU NEED
With 12 months of detailed development, our PCM is more than a ‘tuning box’. The kit is complete, including a perfect fit wiring loom made especially for the selected vehicle.
COOLED BY FINS
The unit itself is housed in a stunning billet aluminium case, finned to ensure adequate cooling plus a beautiful carbon fibre mounting bracket to affix it securely in your engine bay.
KEY FEATURES
- Significant increase in power and torque.
- Simple installation.
- Removable and undetectable.
- Constructed from Billet Aluminium.
- Anodised in signature MMR Gloss black.
- Engineered and hand-assembled in the UK.
- Calibrated in-house by MMR.
- Vehicle-specific loom and bracket.
ADDITIONAL INFORMATION:
| Brand |
|---|
PREPREG is a common term for a reinforcing fabric such carbon which has been pre-impregnated with a resin system. This resin system (typically epoxy) already includes the proper curing agent. As a result, the prepreg is ready to be laid into the mold without the addition of any more resin. In order for the laminate to cure, an autoclave production process is used, a combination of high pressure and heat.
- Maximum strength and performance characterictics. In a hand layup production process, it is difficult to achieve 50% fabric and 50% resin content. Typical hand laminates, even when vacuum bagged, end up with a significant amount of excess resin. Excess resin increases brittleness and reduces overall strength properties. On the other hand, most prepregs contain around 35% resin. This is ideal for maximum cured properties and generally impossible to achieve in normal hand lamination.
- Uniformity and repeatability. The prepreg is of uniform thickness and each part coming out of the mold may theoretically be the same. Vacuum bagging technology may have some errors in processing, but prepreg ensures production consistency.
- Reduce curing time. After the thermal curing cycle, no need to wait for the standard 48 hours can be fully cured.
- Aesthetics. Although prepreg processing still requires mold preparation and demoulding, prepreg processing eliminates air bubbles, makes it easier to obtain a smooth, glossy surface as well as eliminates any seaming lines.
We offer free tracked shipping on all orders within mainland EU. Orders to remote areas such as Malta, Cyprus, and Iceland may incur a surcharge. Worldwide shipping is also available—please contact us for a quote.
Most orders dispatch within one business day (Monday to Friday). EU delivery takes 3–5 working days from dispatch, and tracking details will be provided via email once your order has shipped.
Please note that import taxes may apply outside the EU, and these are the responsibility of the buyer. Some items may ship directly from our suppliers and may have varying delivery times. If an item is out of stock, we will contact you to discuss the available options.
RETURNS
Changed your mind? You can return unused, uninstalled items in original packaging within 30 days of delivery. Return shipping is the customer’s responsibility unless the item is faulty.
Custom, used, or built-to-order items are non-returnable.
Once we receive and inspect your return, refunds are typically processed within 10 business days.
If your item is damaged or incorrect, contact us within 48 hours with photos and order details.
WARRANTY
All VA and VA Motorsports products come with a 1-year limited warranty covering manufacturing defects and fitment issues. For third-party items, warranty terms vary by brand—please check the product listing or contact us for details.
This warranty does not cover wear and tear, incorrect installation, cosmetic damage, labor, or third-party costs.
To start a claim, email us with your order number, issue description, and photos. If the claim is approved, we’ll offer a replacement, store credit, or a refund.
FREQUENTLY ASKED QUESTIONS (Faq)
Do you ship worldwide?
Yes, we do ship worldwide. However, we recommend contacting us before placing your order, as the price only covers the product and does not include shipping costs
How can I determine if a part will fit my vehicle?
Each product listing includes detailed compatibility information. Please review it carefully to ensure the part fits your specific vehicle model and year. If you’re unsure, feel free to contact us with your vehicle details, and we’ll be happy to assist you.
Do you offer installation service?
Yes, we do provide this service in our workshop. Our skilled technicians can professionally install your body styling and performance parts to ensure a perfect fit and optimal performance. Please contact us to schedule an appointment or for more information.
Do you provide free shipping?
Yes, customers within mainland EU can enjoy free shipping on all orders. However, in rare cases, customers from non-EU or remote areas may be contacted about an additional shipping fee. For further questions, feel free to contact us.
How long does shipping take?
Shipping times vary based on your location and the product ordered.
Take note, that in-stock products will be shipped the next working day. Otherwise, your order will be dispatched as stated on its product information.
For customers within the EU, delivery typically takes 3-5 working days from the dispatch date.
For international customers, orders are generally delivered within 5-10 working days from the dispatch date.
What is your return policy?
We accept returns on unused and uninstalled items within 14 days of purchase. The product must be in its original packaging and condition. Shipping fees are non-refundable, and return shipping costs are the buyer's responsibility.
Related products
