Mishimoto BMW N55 OIL CATCH CAN KIT E8X E9X
289.99€
The Mishimoto BMW N55 Oil Catch Can is designed and engineered to reduce carbon build up, a common issue with the direct fuel injection N55 engines. The Mishimoto BMW N55 oil catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports in order to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation.
The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Two aluminium, 3/4″ barb fittings connect the hoses to the can. And, like every Mishimoto N55 oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty!
Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.
KEY FEATURES
- Direct fit for 2011-2013 BMW 335I/335XI/135I
- Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter
- Helps reduce carbon build up on intake valves
- Billet 6061 aluminium can sealed with Viton™ O-rings
- Installs in under 30 minutes
- Robust, application-specific bracket mounts the can in a serviceable location
- Includes pre-molded hoses for simplified installation
- Defends Vanos system and essential engine components from oil blow-by
- CNC-machined aluminium barbed fittings ensure a sturdy connection between lines and can
- Catch can has an 88ml capacity for longer servicing intervals
- Internal air diverter increases air turbulence to improve oil separation
- Helps maintain proper octane levels to reduce potential detonation
- Filter and can are fully serviceable
- US Patent Numbers D966,372 S, ZL 202120175368.7
- Mishimoto Lifetime Warranty
APPLICATIONS
- 2011-2013 BMW 135i Coupe
- 2011-2013 BMW 135i Convertible
- 2011 BMW 335i/xi Sedan
- 2011-2013 BMW 335i/xi Coupe
- 2011-2013 BMW 335i/xi Convertible
Will fit models equipped with N55 engines.
INSTALLATION NOTES
22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs (3NM).
After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle
PURCHASE INCLUDES
(1) Compact Baffled Oil Catch Can
(1) Application-Specific Mounting Bracket
(2) Direct-Fit Hoses
(2) 3/4-in Aluminum Barbed Fittings
Mounting Hardware
Mishimoto Lifetime Warranty
WARRANTY
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
ADDITIONAL INFORMATION:
Brand |
---|
PREPREG is a common term for a reinforcing fabric such carbon which has been pre-impregnated with a resin system. This resin system (typically epoxy) already includes the proper curing agent. As a result, the prepreg is ready to be laid into the mold without the addition of any more resin. In order for the laminate to cure, an autoclave production process is used, a combination of high pressure and heat.
- Maximum strength and performance characterictics. In a hand layup production process, it is difficult to achieve 50% fabric and 50% resin content. Typical hand laminates, even when vacuum bagged, end up with a significant amount of excess resin. Excess resin increases brittleness and reduces overall strength properties. On the other hand, most prepregs contain around 35% resin. This is ideal for maximum cured properties and generally impossible to achieve in normal hand lamination.
- Uniformity and repeatability. The prepreg is of uniform thickness and each part coming out of the mold may theoretically be the same. Vacuum bagging technology may have some errors in processing, but prepreg ensures production consistency.
- Reduce curing time. After the thermal curing cycle, no need to wait for the standard 48 hours can be fully cured.
- Aesthetics. Although prepreg processing still requires mold preparation and demoulding, prepreg processing eliminates air bubbles, makes it easier to obtain a smooth, glossy surface as well as eliminates any seaming lines.
We offer free tracked shipping on all orders within mainland EU. Orders to remote areas such as Malta, Cyprus, and Iceland may incur a surcharge. Worldwide shipping is also available—please contact us for a quote.
Most orders dispatch within one business day (Monday to Friday). EU delivery takes 3–5 working days from dispatch, and tracking details will be provided via email once your order has shipped.
Please note that import taxes may apply outside the EU, and these are the responsibility of the buyer. Some items may ship directly from our suppliers and may have varying delivery times. If an item is out of stock, we will contact you to discuss the available options.
RETURNS
Changed your mind? You can return unused, uninstalled items in original packaging within 30 days of delivery. Return shipping is the customer’s responsibility unless the item is faulty.
Custom, used, or built-to-order items are non-returnable.
Once we receive and inspect your return, refunds are typically processed within 10 business days.
If your item is damaged or incorrect, contact us within 48 hours with photos and order details.
WARRANTY
All VA and VA Motorsports products come with a 1-year limited warranty covering manufacturing defects and fitment issues. For third-party items, warranty terms vary by brand—please check the product listing or contact us for details.
This warranty does not cover wear and tear, incorrect installation, cosmetic damage, labor, or third-party costs.
To start a claim, email us with your order number, issue description, and photos. If the claim is approved, we’ll offer a replacement, store credit, or a refund.
FREQUENTLY ASKED QUESTIONS (Faq)
Yes, we do ship worldwide. However, we recommend contacting us before placing your order, as the price only covers the product and does not include shipping costs
Each product listing includes detailed compatibility information. Please review it carefully to ensure the part fits your specific vehicle model and year. If you’re unsure, feel free to contact us with your vehicle details, and we’ll be happy to assist you.
Yes, we do provide this service in our workshop. Our skilled technicians can professionally install your body styling and performance parts to ensure a perfect fit and optimal performance. Please contact us to schedule an appointment or for more information.
Yes, customers within mainland EU can enjoy free shipping on all orders. However, in rare cases, customers from non-EU or remote areas may be contacted about an additional shipping fee. For further questions, feel free to contact us.
Shipping times vary based on your location and the product ordered.
Take note, that in-stock products will be shipped the next working day. Otherwise, your order will be dispatched as stated on its product information.
For customers within the EU, delivery typically takes 3-5 working days from the dispatch date.
For international customers, orders are generally delivered within 5-10 working days from the dispatch date.
We accept returns on unused and uninstalled items within 14 days of purchase. The product must be in its original packaging and condition. Shipping fees are non-refundable, and return shipping costs are the buyer's responsibility.