Girodisc A2-032B Rear 2-Piece Brake Disc Kit For Porsche 911 991.1 991.2 992.1 996
2,039.99€
GET IN TOUCH
Let’s be honest—if you drive a Porsche, you don’t just cruise. You want every bit of performance you paid for, especially when you’re behind the wheel on a winding road or during those surprise bursts of speed. That’s where the Girodisc A2-032B Rear 2-Piece Brake Disc Kit comes in. Designed as a direct-fit upgrade, it bolts right up with your factory calipers—no headaches, no custom work, just straightforward installation. Swap out your old brake discs, and you’re ready to go.
The real magic? You’re shedding about 2kg per brake disc. That’s not just a number—it’s something you’ll actually feel every time you tap the brakes. The car responds sharper, and your suspension isn’t working as hard to keep up. And when the time comes, you don’t need to buy the whole kit again—just switch out the brake disc ring and keep rolling.
Driving with lightweight, responsive brakes almost feels like the car is reading your mind. Every stop, every curve—it just clicks. And you’re still running genuine Porsche parts everywhere else, so nothing feels out of place.
FEATURES
-
Direct replacement for factory rear brake discs—no modifications needed
-
2-piece floating design with vented, curved-slotted discs
-
Compatible with original Porsche calipers
-
Curved vane construction for improved cooling
-
Simple brake disc ring replacement for future maintenance
-
Reduces unsprung and rotational weight by approx 2kg per brake disc
-
Strong, precise braking you’ll notice right away
APPLICATIONS
-
Porsche / 911 (5th Gen) 1997-2005 / 911 (996) 1997-2005 / 911 GT3 3.6 2003-2005
-
Porsche / 911 (5th Gen) 1997-2005 / 911 Turbo (996) 2000-2005 / 911 GT2 3.6 Twin Turbo 2001-2003
-
Porsche / 911 (5th Gen) 1997-2005 / 911 Turbo (996) 2000-2005 / 911 GT2 3.6 Twin Turbo 2003-2005
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera 3.4 2011-2015
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera 4 3.4 2012-2015
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera 4 GTS 3.8 2014-2015
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera 4S 3.8 2012-2015
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera GTS 3.8 2014-2015
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera S 3.8 2011-2015
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.2) 2015-2019 / 911 Carrera 3.0 Twin Turbo 2015-2019
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.2) 2015-2019 / 911 Carrera 4 3.0 Twin Turbo 2015-2019
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.2) 2015-2019 / 911 Carrera 4 GTS 3.0 Twin Turbo 2017-2019
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.2) 2015-2019 / 911 Carrera 4S 3.0 Twin Turbo 2015-2019
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.2) 2015-2019 / 911 Carrera GTS 3.0 Twin Turbo 2017-2019
-
Porsche / 911 (7th Gen) 2011-2019 / 911 (991.2) 2015-2019 / 911 Carrera S 3.0 Twin Turbo 2015-2019
-
Porsche / 911 (8th Gen) 2019-Present / 911 (992.1) 2019-2025 / 911 Carrera 3.0 Twin Turbo 2019-2025
-
Porsche / 911 (8th Gen) 2019-Present / 911 (992.1) 2019-2025 / 911 Carrera 4 3.0 Twin Turbo 2019-2025
ADDITIONAL INFORMATION:
Manufacturer | Girodisc |
---|---|
Brakes Location | Rear |
Disc Diameter (mm) | 350,0 |
Disc Finish | Curved Slotted |
Disc Side | Left/Right |
Max Thickness | 28,0 |
Min Thickness | 26,0 |
Disc Vane Style | Curved Vane |
Disc Type | Vented |
Disc Quality | Premium |
Material | Cast Iron |
Package Contents | 2x Brake Discs |
Disc Construction | 2-Piece Floating |
Disc Height (mm) | 75,0 |
PREPREG is a common term for a reinforcing fabric such carbon which has been pre-impregnated with a resin system. This resin system (typically epoxy) already includes the proper curing agent. As a result, the prepreg is ready to be laid into the mold without the addition of any more resin. In order for the laminate to cure, an autoclave production process is used, a combination of high pressure and heat.
- Maximum strength and performance characterictics. In a hand layup production process, it is difficult to achieve 50% fabric and 50% resin content. Typical hand laminates, even when vacuum bagged, end up with a significant amount of excess resin. Excess resin increases brittleness and reduces overall strength properties. On the other hand, most prepregs contain around 35% resin. This is ideal for maximum cured properties and generally impossible to achieve in normal hand lamination.
- Uniformity and repeatability. The prepreg is of uniform thickness and each part coming out of the mold may theoretically be the same. Vacuum bagging technology may have some errors in processing, but prepreg ensures production consistency.
- Reduce curing time. After the thermal curing cycle, no need to wait for the standard 48 hours can be fully cured.
- Aesthetics. Although prepreg processing still requires mold preparation and demoulding, prepreg processing eliminates air bubbles, makes it easier to obtain a smooth, glossy surface as well as eliminates any seaming lines.
Total reviews
Persons recommended this product
Anonymous
Shopper
check_circle Verified
Shop owner replied
Anonymous
Shopper
check_circle Verified
Shop owner replied
There are no reviews yet.
Be the first to review “ ”
Thanks for your review!
Your feedback helps us improve our service.
Please log in to submit a review.
We offer free tracked shipping on all orders within mainland EU. Orders to remote areas such as Malta, Cyprus, and Iceland may incur a surcharge. Worldwide shipping is also available—please contact us for a quote.
Most orders dispatch within one business day (Monday to Friday). EU delivery takes 3–5 working days from dispatch, and tracking details will be provided via email once your order has shipped.
Please note that import taxes may apply outside the EU, and these are the responsibility of the buyer. Some items may ship directly from our suppliers and may have varying delivery times. If an item is out of stock, we will contact you to discuss the available options.
RETURNS
Changed your mind? You can return unused, uninstalled items in original packaging within 30 days of delivery. Return shipping is the customer’s responsibility unless the item is faulty.
Custom, used, or built-to-order items are non-returnable.
Once we receive and inspect your return, refunds are typically processed within 10 business days.
If your item is damaged or incorrect, contact us within 48 hours with photos and order details.
WARRANTY
All VA and VA Motorsports products come with a 1-year limited warranty covering manufacturing defects and fitment issues. For third-party items, warranty terms vary by brand—please check the product listing or contact us for details.
This warranty does not cover wear and tear, incorrect installation, cosmetic damage, labor, or third-party costs.
To start a claim, email us with your order number, issue description, and photos. If the claim is approved, we’ll offer a replacement, store credit, or a refund.