Girodisc A2-032 Rear 2-Piece Brake Disc Kit For Porsche 911 991.1 992.1 992.2 996 997.1 997.2

1,999.99

Contact Form

In Stock - Available from Supplier Dispatch between 10 September - 17 September.

Looking to give your Porsche a meaningful upgrade at the rear? The Girodisc A2-032 Rear 2-Piece Brake Disc Kit fits straight on—no headaches, no tools beyond the basics, and definitely no fancy garage needed. Just unbolt your factory brake discs and bolt these right in place. It’s a simple swap that feels anything but basic once you’re back on the road. You’ll notice it, too—every tap of the pedal gives a bit more confidence, thanks to a lighter, more responsive setup.

What’s especially satisfying? These brake discs are nearly 2kg lighter per corner compared to stock, so your Porsche feels just a little bit livelier. The reduction in weight helps your suspension react more quickly. It’s not magic—it’s just smart engineering that lets your car respond the way you wish it always did. Plus, when the iron brake disc ring wears out, you only need to change that part—not the whole thing—making your life a lot simpler down the road.

It’s that rare upgrade you actually feel, not just see on a spec sheet. And honestly, who doesn’t want a sharper drive with less fuss?

FEATURES

  • Direct replacement for Porsche OE rear brake discs—no modifications needed

  • Works perfectly with factory calipers

  • 2-piece floating design for improved performance

  • Curved slotted surface for steady bite and heat control

  • Vented, curved vane construction


APPLICATIONS

• Porsche / 911 (5th Gen) 1997-2005 / 911 (996) 1997-2005 / 911 Carrera 3.4 2002-2005
• Porsche / 911 (5th Gen) 1997-2005 / 911 (996) 1997-2005 / 911 Carrera 3.6 2001-2002
• Porsche / 911 (5th Gen) 1997-2005 / 911 (996) 1997-2005 / 911 Carrera 3.6 2002-2005
• Porsche / 911 (5th Gen) 1997-2005 / 911 (996) 1997-2005 / 911 Carrera 4 3.4 2002-2005
• Porsche / 911 (5th Gen) 1997-2005 / 911 (996) 1997-2005 / 911 Carrera 4 3.6 2001-2002
• Porsche / 911 (5th Gen) 1997-2005 / 911 (996) 1997-2005 / 911 Carrera 4 3.6 2002-2005
• Porsche / 911 (5th Gen) 1997-2005 / 911 (996) 1997-2005 / 911 Carrera 4S 3.6 2003-2005
• Porsche / 911 (5th Gen) 1997-2005 / 911 (996) 1997-2005 / 911 GT3 3.6 1999-2003
• Porsche / 911 (5th Gen) 1997-2005 / 911 (996) 1997-2005 / 911 GT3 3.6 2003-2005
• Porsche / 911 (5th Gen) 1997-2005 / 911 Turbo (996) 2000-2005 / 911 3.6 Twin Turbo S 2003-2005
• Porsche / 911 (5th Gen) 1997-2005 / 911 Turbo (996) 2000-2005 / 911 GT2 3.6 Twin Turbo 2001-2003
• Porsche / 911 (5th Gen) 1997-2005 / 911 Turbo (996) 2000-2005 / 911 GT2 3.6 Twin Turbo 2003-2005
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.1) 2004-2009 / 911 Carrera 3.6 2004-2008
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.1) 2004-2009 / 911 Carrera 4 3.6 2005-2007
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.1) 2004-2009 / 911 Carrera 4S 3.8 2004-2005
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.1) 2004-2009 / 911 Carrera 4S 3.8 2005-2008
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.1) 2004-2009 / 911 Carrera S 3.8 2004-2005
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.1) 2004-2009 / 911 Carrera S 3.8 2005-2008
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.1) 2004-2009 / 911 GT3 3.6 2006-2009
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.2) 2008-2012 / 911 Carrera 3.6 2008-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.2) 2008-2012 / 911 Carrera 4 3.6 2008-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.2) 2008-2012 / 911 Carrera 4 GTS 3.8 2010-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.2) 2008-2012 / 911 Carrera 4S 3.8 2008-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.2) 2008-2012 / 911 Carrera GTS 3.8 2010-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.2) 2008-2012 / 911 Carrera S 3.8 2008-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.2) 2008-2012 / 911 GT3 3.8 2009-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.2) 2008-2012 / 911 GT3 RS 3.8 2009-2011
• Porsche / 911 (6th Gen) 2004-2012 / 911 (997.2) 2008-2012 / 911 GT3 RS 4.0 2011-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 Turbo (997.1) 2006-2009 / 911 3.6 Twin Turbo 2006-2009
• Porsche / 911 (6th Gen) 2004-2012 / 911 Turbo (997.1) 2006-2009 / 911 GT2 3.6 Twin Turbo 2007-2009
• Porsche / 911 (6th Gen) 2004-2012 / 911 Turbo (997.2) 2009-2012 / 911 3.8 Twin Turbo 2009-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 Turbo (997.2) 2009-2012 / 911 3.8 Twin Turbo S 2010-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 Turbo (997.2) 2009-2012 / 911 GT2 3.6 Twin Turbo 2009-2012
• Porsche / 911 (6th Gen) 2004-2012 / 911 Turbo (997.2) 2009-2012 / 911 GT2 RS 3.6 Twin Turbo 2010-2012
• Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera 3.4 2011-2015
• Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera 4 3.4 2012-2015
• Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera 4 GTS 3.8 2014-2015
• Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera 4S 3.8 2012-2015
• Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera GTS 3.8 2014-2015
• Porsche / 911 (7th Gen) 2011-2019 / 911 (991.1) 2012-2015 / 911 Carrera S 3.8 2011-2015
• Porsche / 911 (8th Gen) 2019-Present / 911 (992.1) 2019-2025 / 911 Carrera 4S 3.0 Twin Turbo 2019-2025
• Porsche / 911 (8th Gen) 2019-Present / 911 (992.1) 2019-2025 / 911 Carrera S 3.0 Twin Turbo 2019-2025
• Porsche / 911 (8th Gen) 2019-Present / 911 (992.2) 2025-Present / 911 Carrera 3.0 Twin Turbo 2025-Present
• Porsche / 911 (8th Gen) 2019-Present / 911 (992.2) 2025-Present / 911 Carrera 4 3.0 Twin Turbo 2025-Present
• Porsche / 911 (8th Gen) 2019-Present / 911 (992.2) 2025-Present / 911 Carrera S 3.0 Twin Turbo 2025-Present
• Porsche / 911 (8th Gen) 2019-Present / 911 (992.2) 2025-Present / 911 Carrera 4S 3.0 Twin Turbo 2025-Present

ADDITIONAL INFORMATION:

Manufacturer

Girodisc

Brakes Location

Rear

Disc Diameter (mm)

350,0

Disc Finish

Curved Slotted

Disc Side

Left/Right

Max Thickness

28,0

Min Thickness

26,0

Disc Vane Style

Curved Vane

Disc Type

Vented

Disc Quality

Premium

Material

Cast Iron

Package Contents

2x Brake Discs

Disc Construction

2-Piece Floating

Disc Height (mm)

75,0

PREPREG is a common term for a reinforcing fabric such carbon which has been pre-impregnated with a resin system. This resin system (typically epoxy) already includes the proper curing agent. As a result, the prepreg is ready to be laid into the mold without the addition of any more resin. In order for the laminate to cure, an autoclave production process is used, a combination of high pressure and heat.

  • Maximum strength and performance characterictics. In a hand layup production process, it is difficult to achieve 50% fabric and 50% resin content.  Typical hand laminates, even when vacuum bagged, end up with a significant amount of excess resin. Excess resin increases brittleness and reduces overall strength properties. On the other hand, most prepregs contain around 35% resin. This is ideal for maximum cured properties and generally impossible to achieve in normal hand lamination.
  • Uniformity and repeatability. The prepreg is of uniform thickness and each part coming out of the mold may theoretically be the same. Vacuum bagging technology may have some errors in processing, but prepreg ensures production consistency.
  • Reduce curing time. After the thermal curing cycle, no need to wait for the standard 48 hours can be fully cured.
  • Aesthetics. Although prepreg processing still requires mold preparation and demoulding, prepreg processing eliminates air bubbles, makes it easier to obtain a smooth, glossy surface as well as eliminates any seaming lines.

We offer free tracked shipping on all orders within mainland EU. Orders to remote areas such as Malta, Cyprus, and Iceland may incur a surcharge. Worldwide shipping is also available—please contact us for a quote.

Most orders dispatch within one business day (Monday to Friday). EU delivery takes 3–5 working days from dispatch, and tracking details will be provided via email once your order has shipped.

Please note that import taxes may apply outside the EU, and these are the responsibility of the buyer. Some items may ship directly from our suppliers and may have varying delivery times. If an item is out of stock, we will contact you to discuss the available options.

📦 View full shipping policy

RETURNS

Changed your mind? You can return unused, uninstalled items in original packaging within 30 days of delivery. Return shipping is the customer’s responsibility unless the item is faulty.

Custom, used, or built-to-order items are non-returnable.

Once we receive and inspect your return, refunds are typically processed within 10 business days.

If your item is damaged or incorrect, contact us within 48 hours with photos and order details.

📄 View full refund policy

WARRANTY

All VA and VA Motorsports products come with a 1-year limited warranty covering manufacturing defects and fitment issues. For third-party items, warranty terms vary by brand—please check the product listing or contact us for details.

This warranty does not cover wear and tear, incorrect installation, cosmetic damage, labor, or third-party costs.

To start a claim, email us with your order number, issue description, and photos. If the claim is approved, we’ll offer a replacement, store credit, or a refund.

📄 View full warranty policy

FREQUENTLY ASKED QUESTIONS (Faq)

Yes, we do ship worldwide. However, we recommend contacting us before placing your order, as the price only covers the product and does not include shipping costs

Each product listing includes detailed compatibility information. Please review it carefully to ensure the part fits your specific vehicle model and year. If you’re unsure, feel free to contact us with your vehicle details, and we’ll be happy to assist you.

Yes, we do provide this service in our workshop. Our skilled technicians can professionally install your body styling and performance parts to ensure a perfect fit and optimal performance. Please contact us to schedule an appointment or for more information.

Yes, customers within mainland EU can enjoy free shipping on all orders. However, in rare cases, customers from non-EU or remote areas may be contacted about an additional shipping fee. For further questions, feel free to contact us.

Shipping times vary based on your location and the product ordered.

Take note, that in-stock products will be shipped the next working day. Otherwise, your order will be dispatched as stated on its product information.

For customers within the EU, delivery typically takes 3-5 working days from the dispatch date.

For international customers, orders are generally delivered within 5-10 working days from the dispatch date.

We accept returns on unused and uninstalled items within 14 days of purchase. The product must be in its original packaging and condition. Shipping fees are non-refundable, and return shipping costs are the buyer's responsibility.

Girodisc A2-032 Rear 2-Piece Brake Disc Kit For Porsche 911 991.1 992.1 992.2 996 997.1 997.2
Girodisc A2-032 Rear 2-Piece Brake Disc Kit For Porsche 911 991.1 992.1 992.2 996 997.1 997.2