Girodisc A1-175 Front 2-Piece Brake Disc Kit For Mercedes-Benz C215
2,659.99€
GET IN TOUCH
Give your Mercedes-Benz the stopping power it deserves with the Girodisc A1-175 Front 2-Piece Brake Disc Kit. This kit fits just like the original—bolt it on, and you’re ready to roll. No garage drama, no custom tools needed. What really sets it apart is the weight—each brake disc is about 2kg lighter than stock. That might sound small, but it means your car feels a little quicker off the line, and your suspension responds with more confidence over every bump and corner.
Swapping out brake discs down the line is a breeze—just replace the iron ring, and keep your setup fresh. You’ll notice the way your brakes feel more alive under your foot, especially if you enjoy a spirited drive now and then. Built with curved slots and a vented, two-piece floating design, these brake discs balance performance with everyday comfort. Sometimes, it’s the small details that make all the difference.
FEATURES
-
Direct bolt-on fit for easy installation
-
2-piece floating construction for better heat management
-
Curved slotted and vented design to improve braking feel
-
Roughly 2kg lighter per brake disc than stock
-
Replaceable iron brake disc rings for easy maintenance
APPLICATIONS
• Mercedes-Benz / CL-Class (2nd Gen) 1999-2006 / Coupe (C215) 1999-2006 / CL55 AMG 5.4 Supercharged 2002-2006
• Mercedes-Benz / CL-Class (2nd Gen) 1999-2006 / Coupe (C215) 1999-2006 / CL600 5.5 Twin Turbo 2002-2006
• Mercedes-Benz / S-Class (2nd Gen) 1998-2005 / Sedan (W220) 1998-2005 / S55 AMG 5.5 Supercharged 2003-2005
• Mercedes-Benz / S-Class (2nd Gen) 1998-2005 / Sedan (W220) 1998-2005 / S65 AMG 6.0 Twin Turbo 2004-2005
ADDITIONAL INFORMATION:
Manufacturer | Girodisc |
---|---|
Brakes Location | Front |
Disc Diameter (mm) | 390,0 |
Disc Finish | Curved Slotted |
Disc Side | Left/Right |
Max Thickness | 34,0 |
Min Thickness | 32,0 |
Disc Vane Style | Curved Vane |
Disc Type | Vented |
Disc Quality | Premium |
Material | Cast Iron |
Package Contents | 2x Brake Discs |
Disc Construction | 2-Piece Floating |
Disc Height (mm) | 77,0 |
Hub Hole Diameter (mm) | 67,0 |
PREPREG is a common term for a reinforcing fabric such carbon which has been pre-impregnated with a resin system. This resin system (typically epoxy) already includes the proper curing agent. As a result, the prepreg is ready to be laid into the mold without the addition of any more resin. In order for the laminate to cure, an autoclave production process is used, a combination of high pressure and heat.
- Maximum strength and performance characterictics. In a hand layup production process, it is difficult to achieve 50% fabric and 50% resin content. Typical hand laminates, even when vacuum bagged, end up with a significant amount of excess resin. Excess resin increases brittleness and reduces overall strength properties. On the other hand, most prepregs contain around 35% resin. This is ideal for maximum cured properties and generally impossible to achieve in normal hand lamination.
- Uniformity and repeatability. The prepreg is of uniform thickness and each part coming out of the mold may theoretically be the same. Vacuum bagging technology may have some errors in processing, but prepreg ensures production consistency.
- Reduce curing time. After the thermal curing cycle, no need to wait for the standard 48 hours can be fully cured.
- Aesthetics. Although prepreg processing still requires mold preparation and demoulding, prepreg processing eliminates air bubbles, makes it easier to obtain a smooth, glossy surface as well as eliminates any seaming lines.
Total reviews
Persons recommended this product
Anonymous
Shopper
check_circle Verified
Shop owner replied
Anonymous
Shopper
check_circle Verified
Shop owner replied
There are no reviews yet.
Be the first to review “ ”
Thanks for your review!
Your feedback helps us improve our service.
Please log in to submit a review.
We offer free tracked shipping on all orders within mainland EU. Orders to remote areas such as Malta, Cyprus, and Iceland may incur a surcharge. Worldwide shipping is also available—please contact us for a quote.
Most orders dispatch within one business day (Monday to Friday). EU delivery takes 3–5 working days from dispatch, and tracking details will be provided via email once your order has shipped.
Please note that import taxes may apply outside the EU, and these are the responsibility of the buyer. Some items may ship directly from our suppliers and may have varying delivery times. If an item is out of stock, we will contact you to discuss the available options.
RETURNS
Changed your mind? You can return unused, uninstalled items in original packaging within 30 days of delivery. Return shipping is the customer’s responsibility unless the item is faulty.
Custom, used, or built-to-order items are non-returnable.
Once we receive and inspect your return, refunds are typically processed within 10 business days.
If your item is damaged or incorrect, contact us within 48 hours with photos and order details.
WARRANTY
All VA and VA Motorsports products come with a 1-year limited warranty covering manufacturing defects and fitment issues. For third-party items, warranty terms vary by brand—please check the product listing or contact us for details.
This warranty does not cover wear and tear, incorrect installation, cosmetic damage, labor, or third-party costs.
To start a claim, email us with your order number, issue description, and photos. If the claim is approved, we’ll offer a replacement, store credit, or a refund.