EBC GD501 GD Dimpled & Slotted Rear Brake Discs For BMW E31 E38

369.99

NEED HELP? CONTACT US
In Stock - Available from Supplier Dispatch between 16 October - 23 October.

Experience confident stops with the EBC GD501 dimpled and slotted rear discs for BMW. The deep slots spin off dust and gas, so you keep firm contact between pad and rotor. Far from plain, the blind dimples resist cracks and help surface gasses escape under heavy braking. Crafted in Europe from high-grade alloy, these discs handle heat on road, rally or track days. Wide grooves shed dirt, so you avoid uneven wear and maintain smooth operation season after season. A corrosion-resistant coating keeps the discs looking good and working well in wet or salty conditions. Fit them easily into your standard brake setup and take on steep hills or open straights with fresh confidence. You’ll feel the difference at every turn.

FEATURES

  • Slot pattern runs to disc edge for dust removal

  • Blind dimples block cracks and vent gas

  • Made in Europe from high-grade cast alloy

  • Solid one-piece construction resists warping

  • Wide grooves clear dirt, curb uneven wear

  • Anti-corrosion coating fights rust and salt

APPLICATIONS

  • BMW / 7-Series (3rd Gen) 1994–2001 / Sedan (E38) 1994–2001 / 725D 2.5 TD 1996–2001

  • BMW / 7-Series (3rd Gen) 1994–2001 / Sedan (E38) 1994–2001 / 728 2.8 1995–2001

  • BMW / 7-Series (3rd Gen) 1994–2001 / Sedan (E38) 1994–2001 / 730 3.0 1994–2001

  • BMW / 7-Series (3rd Gen) 1994–2001 / Sedan (E38) 1994–2001 / 730D 3.0 TD 1998–2001

  • BMW / 7-Series (3rd Gen) 1994–2001 / Sedan (E38) 1994–2001 / 735 3.5 1996–1998

  • BMW / 7-Series (3rd Gen) 1994–2001 / Sedan (E38) 1994–2001 / 740 4.0 1994–1996

  • BMW / 7-Series (3rd Gen) 1994–2001 / Sedan (E38) 1994–2001 / 740 4.4 1996–2001

  • BMW / 8-Series (1st Gen) 1990–1999 / Coupe (E31) 1990–1999 / 840 4.0 1993–1994

  • BMW / 8-Series (1st Gen) 1990–1999 / Coupe (E31) 1990–1999 / 840 4.0 1994–1996

  • BMW / 8-Series (1st Gen) 1990–1999 / Coupe (E31) 1990–1999 / 840 4.4 1996–1999

  • BMW / 8-Series (1st Gen) 1990–1999 / Coupe (E31) 1990–1999 / 850 5.0 1990–1993

  • BMW / 8-Series (1st Gen) 1990–1999 / Coupe (E31) 1990–1999 / 850 5.0 1993–1994

  • BMW / 8-Series (1st Gen) 1990–1999 / Coupe (E31) 1990–1999 / 850 Ci 5.4 1992–1999

ADDITIONAL INFORMATION:

Manufacturer

EBC

OE Numbers

BMW-34211157900, BMW-34211157953, BMW-34211159900

Disc Diameter (mm)

324

Disc Finish

Curved Slotted & Dimple Drilled

Disc Construction

1-Piece

Disc Side

Left/Right

Max Thickness

12

Min Thickness

10

Disc Type

Solid

Disc Quality

Premium

Material

Cast Iron

Package Contents

2x Brake Discs

Bolt Hole Quantity

5,00

Disc Height (mm)

61

UPC/EAN Code

5050953017469

PREPREG is a common term for a reinforcing fabric such carbon which has been pre-impregnated with a resin system. This resin system (typically epoxy) already includes the proper curing agent. As a result, the prepreg is ready to be laid into the mold without the addition of any more resin. In order for the laminate to cure, an autoclave production process is used, a combination of high pressure and heat.

  • Maximum strength and performance characterictics. In a hand layup production process, it is difficult to achieve 50% fabric and 50% resin content.  Typical hand laminates, even when vacuum bagged, end up with a significant amount of excess resin. Excess resin increases brittleness and reduces overall strength properties. On the other hand, most prepregs contain around 35% resin. This is ideal for maximum cured properties and generally impossible to achieve in normal hand lamination.
  • Uniformity and repeatability. The prepreg is of uniform thickness and each part coming out of the mold may theoretically be the same. Vacuum bagging technology may have some errors in processing, but prepreg ensures production consistency.
  • Reduce curing time. After the thermal curing cycle, no need to wait for the standard 48 hours can be fully cured.
  • Aesthetics. Although prepreg processing still requires mold preparation and demoulding, prepreg processing eliminates air bubbles, makes it easier to obtain a smooth, glossy surface as well as eliminates any seaming lines.

Thanks for your review!

Your feedback helps us improve our service.

Please log in to submit a review.

We offer free tracked shipping on all orders within mainland EU. Orders to remote areas such as Malta, Cyprus, and Iceland may incur a surcharge. Worldwide shipping is also available—please contact us for a quote.

Most orders dispatch within one business day (Monday to Friday). EU delivery takes 3–5 working days from dispatch, and tracking details will be provided via email once your order has shipped.

Please note that import taxes may apply outside the EU, and these are the responsibility of the buyer. Some items may ship directly from our suppliers and may have varying delivery times. If an item is out of stock, we will contact you to discuss the available options.

📦 View full shipping policy

RETURNS

Changed your mind? You can return unused, uninstalled items in original packaging within 30 days of delivery. Return shipping is the customer’s responsibility unless the item is faulty.

Custom, used, or built-to-order items are non-returnable.

Once we receive and inspect your return, refunds are typically processed within 10 business days.

If your item is damaged or incorrect, contact us within 48 hours with photos and order details.

📄 View full refund policy

WARRANTY

All VA and VA Motorsports products come with a 1-year limited warranty covering manufacturing defects and fitment issues. For third-party items, warranty terms vary by brand—please check the product listing or contact us for details.

This warranty does not cover wear and tear, incorrect installation, cosmetic damage, labor, or third-party costs.

To start a claim, email us with your order number, issue description, and photos. If the claim is approved, we’ll offer a replacement, store credit, or a refund.

📄 View full warranty policy

EBC GD501 GD Dimpled & Slotted Rear Brake Discs For BMW E31 E38
EBC GD501 GD Dimpled & Slotted Rear Brake Discs For BMW E31 E38