EBC D1995 Premium OE Front Brake Discs For BMW F39 F40 F45 F46

339.99

NEED HELP? CONTACT US
In Stock - Available from Supplier Dispatch between 10 October - 17 October.

Built to match original factory specs down to the tiniest detail, the EBC D1995 Premium Front Brake Discs are a no-fuss, direct-fit solution that delivers dependable braking every time. Machined to tight tolerances—less than 0.05mm—these discs offer a smooth fit and consistent performance, without the extra noise, vibration, or early wear that cheaper alternatives often bring along.

Made from high-grade G3000 cast iron, they’re crafted to handle daily driving stress like heat buildup and stop-start traffic without breaking a sweat. EBC sources components from trusted OEM manufacturers, so you know you’re getting quality that’s been tested, inspected, and certified—including nods from the strict German TÜV standards.

This isn’t about reinventing the wheel—it’s about making sure your braking stays sharp, quiet, and reliable, mile after mile. Perfect for those who just want parts that do their job without drama.

FEATURES

  • Direct OE-fit design for easy installation

  • Machined to within <0.05mm tolerances for consistent braking

  • High-quality G3000 cast iron resists heat, wear, and warping

  • 1-piece vented disc design

  • Plain (blank) finish—quiet, reliable performance

  • Includes 2x brake discs for front left/right

  • 330mm diameter with 5-bolt pattern

  • Minimum thickness: 22mm; maximum: 24mm

APPLICATIONS

  • BMW / 1-Series (3rd Gen) 2019–Present / Hatchback (F40) 2019–Present / 120 2.0 Turbo 2020–Present

  • BMW / 1-Series (3rd Gen) 2019–Present / Hatchback (F40) 2019–Present / 120D 2.0 TD 2020–Present

  • BMW / 2-Series (1st Gen) 2013–2021 / Active Tourer (F45) 2013–2021 / 225 2.0 Turbo (231HP/170KW) 2013–2020

  • BMW / 2-Series (1st Gen) 2013–2021 / Gran Tourer (F46) 2014–2022 / 220 2.0 Turbo (192HP/140KW) 2014–2020

  • BMW / 2-Series (1st Gen) 2013–2021 / Gran Tourer (F46) 2014–2022 / 220D 2.0 TD (190HP/140KW) 2014–2018

  • BMW / X2 (1st Gen) 2018–Present / SUV (F39) 2018–Present / X2 2.0 Turbo (20) 2018–Present

  • BMW / X2 (1st Gen) 2018–Present / SUV (F39) 2018–Present / X2 2.0 TD (20D) 2018–Present

  • BMW / X2 (1st Gen) 2018–Present / SUV (F39) 2018–Present / X2 2.0 Twin TD (25D) 2018–Present

  • MINI / Countryman (2nd Gen) 2017–Present / SUV (F60) 2017–Present / Countryman Cooper S 2.0 Turbo (4WD) 2017–Present

  • MINI / Countryman (2nd Gen) 2017–Present / SUV (F60) 2017–Present / Countryman Cooper S 2.0 Turbo 2017–Present

  • MINI / Countryman (2nd Gen) 2017–Present / SUV (F60) 2017–Present / Countryman Cooper SD 2.0 TD (4WD) 2017–Present

  • MINI / Countryman (2nd Gen) 2017–Present / SUV (F60) 2017–Present / Countryman Cooper SD 2.0 TD 2017–Present

  • MINI / Countryman (2nd Gen) 2017–Present / SUV (F60) 2017–Present / Countryman Cooper SE 1.5 Turbo 2017–Present

ADDITIONAL INFORMATION:

Manufacturer

EBC

Disc Diameter (mm)

330

Disc Finish

Plain (Blank)

Disc Construction

1-Piece

Disc Side

Left/Right

Max Thickness

24

Min Thickness

22

Disc Type

Vented

Disc Quality

Premium

Material

Cast Iron

Package Contents

2x Brake Discs

Bolt Hole Quantity

5,00

Disc Vane Style

Straight Vane

Disc Height (mm)

45

UPC/EAN Code

5050953839719

PREPREG is a common term for a reinforcing fabric such carbon which has been pre-impregnated with a resin system. This resin system (typically epoxy) already includes the proper curing agent. As a result, the prepreg is ready to be laid into the mold without the addition of any more resin. In order for the laminate to cure, an autoclave production process is used, a combination of high pressure and heat.

  • Maximum strength and performance characterictics. In a hand layup production process, it is difficult to achieve 50% fabric and 50% resin content.  Typical hand laminates, even when vacuum bagged, end up with a significant amount of excess resin. Excess resin increases brittleness and reduces overall strength properties. On the other hand, most prepregs contain around 35% resin. This is ideal for maximum cured properties and generally impossible to achieve in normal hand lamination.
  • Uniformity and repeatability. The prepreg is of uniform thickness and each part coming out of the mold may theoretically be the same. Vacuum bagging technology may have some errors in processing, but prepreg ensures production consistency.
  • Reduce curing time. After the thermal curing cycle, no need to wait for the standard 48 hours can be fully cured.
  • Aesthetics. Although prepreg processing still requires mold preparation and demoulding, prepreg processing eliminates air bubbles, makes it easier to obtain a smooth, glossy surface as well as eliminates any seaming lines.

Thanks for your review!

Your feedback helps us improve our service.

Please log in to submit a review.

We offer free tracked shipping on all orders within mainland EU. Orders to remote areas such as Malta, Cyprus, and Iceland may incur a surcharge. Worldwide shipping is also available—please contact us for a quote.

Most orders dispatch within one business day (Monday to Friday). EU delivery takes 3–5 working days from dispatch, and tracking details will be provided via email once your order has shipped.

Please note that import taxes may apply outside the EU, and these are the responsibility of the buyer. Some items may ship directly from our suppliers and may have varying delivery times. If an item is out of stock, we will contact you to discuss the available options.

📦 View full shipping policy

RETURNS

Changed your mind? You can return unused, uninstalled items in original packaging within 30 days of delivery. Return shipping is the customer’s responsibility unless the item is faulty.

Custom, used, or built-to-order items are non-returnable.

Once we receive and inspect your return, refunds are typically processed within 10 business days.

If your item is damaged or incorrect, contact us within 48 hours with photos and order details.

📄 View full refund policy

WARRANTY

All VA and VA Motorsports products come with a 1-year limited warranty covering manufacturing defects and fitment issues. For third-party items, warranty terms vary by brand—please check the product listing or contact us for details.

This warranty does not cover wear and tear, incorrect installation, cosmetic damage, labor, or third-party costs.

To start a claim, email us with your order number, issue description, and photos. If the claim is approved, we’ll offer a replacement, store credit, or a refund.

📄 View full warranty policy

EBC D1995 Premium OE Front Brake Discs For BMW F39 F40 F45 F46
EBC D1995 Premium OE Front Brake Discs For BMW F39 F40 F45 F46