Est. Dispatch Date: 20 September - 4 October
Mishimoto PERFORMANCE CHARGE AIR COOLER MANIFOLD BMW S58 G8X M2 M3 M4
4,039.99€
Share this item:
KEY FEATURES
- Direct fit for 2021+ G8X BMW M3/M4
- Bar-and-plate core TIG welded to cast-aluminum manifold withstands over 60 PSI of boost
- Also available in custom colors
- Includes billet fuel rail, lines, and precision-drilled ports for port injection*
- Nitrous ready with easily accessible 1/8-NPT or 1/16-NPT nozzle adapters and caps
- Includes PTFE -AN fuel lines that tee into stock fuel lines
- Robust bar-and-plate core for IATs as low as 11-degrees above ambient
- Improves flow to each cylinder by an average of 14-percent
- Improves cooling without increasing pressure drop over stock
- 33-percent core volume increase over stock with a 24-percent greater flow area
- CFD-designed lower plenum for even flow distribution and safe fueling
- Cast and CNC-machined runners accept stock O-rings or included fiber gasket
- Includes harness brackets, engine cover mount, and custom EVAP lines for seamless install
- Plenum cutout allows easy access to oil filter without impeding flow
- Includes two additional 1/8-NPT ports for manifold reference lines or sensors
- Also fits X3 M/X4 M models with included EVAP plug and fitting
- Mishimoto Lifetime Warranty
- Estimated ship date of August 31, 2023
PRODUCT DESCRIPTION
The S58 under the hood of the 2021+ G80 M3 has over 45 years of lineage behind it, and it shows in nearly three-second 0-60 times and over 500 horsepower. But like every generation before it, the G80 M3 has the potential to be even more powerful. Bolt-on mods, big turbos, and tunes can push the S58 over the 800 HP mark, but that much power requires serious cooling. Luckily, Mishimoto has developed a charge air cooler manifold suited for serious power.
The stock G80 M3 charge air cooler is… fine. The combination intercooler/intake manifold design is efficient, but it’s let down by the tube-and-fin core crimped onto the thermoplastic plenum. Those crimps are quickly becoming a notorious weak point, with many failing at as little as 3 lbs. of boost over stock. The solution is Mishimoto’s cast aluminum and TIG-welded manifold with a robust bar-and-plate core, designed to withstand boost pressures over 60 PSI without breaking a sweat.
Reliability aside, the Mishimoto charge air cooler’s performance possibilities are nearly endless. Our core is 33 percent larger than stock, and the manifold flows an average of 14-percent better to each cylinder. That, combined with the increased cooling capacity of the bar-and-plate core, results in reduced pressure drop and intake air temps as low as 11-degrees above ambient under heavy load. Our CFD-designed lower plenum also features an internal diverter to ensure the entire core is utilized and each cylinder receives even flow for safe and optimal fueling. The cast and CNC-machined runners feature O-ring grooves to accept factory seals, and we’ve included a fiber gasket that insulates the runners from engine heat for those seeking every degree of cooling.;
Insane power levels require equally insane amounts of fuel, so we’ve added provisions for port fuel injection, including a billet fuel rail and anodized aluminum injector blanks to cap the injector ports when not in use. Our precision-machined injector ports feature optimized geometry for the perfect mixing of air and fuel, with no drilling required. The included PTFE -AN fuel lines and fittings are suitable for ethanol and tee into the stock fuel lines. Additionally, six nitrous ports accept 1/8 or 1/16-NPT nozzles and can be capped off when not in use.
If cooling, flow, and reliability weren’t enough, we also designed our charge air cooler to fit like stock. This kit includes brackets to keep your wiring tidy, a mount to fit the stock engine cover, and custom EVAP lines for a seamless installation. A convenient cutout in the plenum allows for easy access to the oil filter, without affecting flow. Like all Mishimoto products, this performance charge air cooler for the 2021+ BMW G80 M3 is backed by our Mishimoto Lifetime Warranty for a lifetime of exceptional performance. So if you want the ultimate upgrade to squeeze serious power from your S58 engine, this Mishimoto charge air cooler manifold is for you.
APPLICATIONS
- 2021+ BMW M3 3.0L
- 2021+ BMW M4 3.0L
- 2021+ BMW M3 Competition 3.0L
- 2021+ BMW M4 Competition 3.0L
- 2019+ BMW X3 M 3.0L
- 2019+ BMW X4 M 3.0L
- 2019+ BMW X3 M Competition 3.0L
- 2019+ BMW X4 M Competition 3.0L
Will fit models equipped with S58 engines.
*Use of the included fuel rail is optional and for race-use only. The fuel rail has a tamper-proof sticker and may be removed only if the vehicle will no longer be used on the street or highway. Check local emissions regulations before removing.
PURCHASE INCLUDES
(1) Mishimoto Charge Air Cooler Manifold
(1) Intake Manifold Gasket
(1) Manifold/Intercooler Accessory Bracket Set
(6) -6 ORB Plugs
(6) -6 ORB to 1/8-in NPT Adapters
(6) -6 ORB to 1/16-in NPT Adapters
(1) Fuel Rail
(6) Fuel Injector Blanks
(2) -8 ORB Plugs
(1) -10 ORB Plug
(2) 1/8-in NPT Plugs
(2) EVAP System Hoses
(1) Port Injection Fuel Line Kit
(1) Hardware Kit
Mishimoto Lifetime Warranty
DOWNLOADS
Engineering Report
Installation Guides
(Size: 8.4 MB)
WARRANTY
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
Brand |
---|
SHIPPING
VOGUE AUTOMOTIVE is proud to provide next working day dispatch on majority of our products.
We offer:
-
- FREE EU SHIPPING: Mainland EU customers are eligible for a free standard tracked shipping service. Please note that a shipping surcharge may be applicable for deliveries to remote areas or islands such as Malta, Cyprus, Iceland, etc. Shipping times vary by country, but the average lead time is 3-5 working days from the dispatch date. On rare occasions, we may contact you for an additional shipping fee if your location is considered remote, as it falls outside our standard EU shipping pricing. Before placing your order, please get in touch with us if you are situated in a remote area.
- RAPID DISPATCH: We typically dispatch your order on the next working day. In the case of larger items, we might take an extra day to ensure careful packaging.
- WORLDWIDE SHIPPING: We also offer worldwide shipping for all orders. International customers are kindly requested to contact us for a shipping quotation before finalizing their order.
IMPORT DUTIES AND TAXES: Import duties, taxes, and brokerage fees are not included in the product price or shipping and handling cost. These charges are the buyer’s responsibility as we are only charging the transportation fee for your order. You may check with your country’s customs office to determine if there will be additional costs.
RETURNS, EXCHANGES & WARRANTY
We take extra care in bringing you the best quality products and we pride ourselves on our industry leading customer service.
We examine all orders prior to dispatching to customers. All products are tested on specific vehicles in our workshop before available for sale.
We strongly advise you to check all contents when the package is delivered to make sure no damage has occurred during transportation and report any problems to us within 7 days. This will allow us to raise a claim with the shipping company as they have a time limit for reporting any shipping damages. Failing to inform us about this might result in your claims being declined.
In rare cases, if you find that a product has been damaged in transit or a fitment issue, please contact us by email info@vogueautomotive.com and we will resolve your query in quickest manner possible. When contacting us please provide as much information as possible and including any supporting photos if available.
RETURNS
- Buyers will be responsible for return postage.
- We recommend using a traceable service with insurance for returning any unwanted goods back to us.
- We cannot exchange or refund any goods returned in damaged condition.
- We will not accept any returned products which were modified/altered in any way by the customer.
- If possible please retain and reuse all original packaging.
WARRANTY EXCLUSIONS
Our warranty on exterior products covers fitment issues only.
- We do not cover return shipping charges unless a product is faulty.
- Damage caused to a product during installation or from use of parts not supplied by us.
- Damage and changes in appearances caused by external forces and elements.
- We reserve the rights to change the warranty conditions without prior notice.